This bump box does not include a wiring harness like my other available box, you will need to supply your own wire and connections, there are around six inches of wire to splice onto. Red - Battery 12v via switch and 10amp fuse. Green - Transbrake Solenoid 12v.You will need a few items to complete the install, these arent provided as there are lots of factors which make each install unique, these items are. New for Version 3 are 5 different Bump Programs that are completely and easily adjusted via a digital controller located inside the case. All times can be adjusted in increments of. 01 seconds, once the lid is removed, programming takes less than one minute, programming is fool proof as there is a digital screen which displays all of your settings, here are the details of each program.. P1 = Standard Bump, once bump button is triggered Bump happens instantly at set time. P2 = Double Bump, once bump button is triggered Bump happens, when trigger is released another bump occurs, these bumps can be different lengths, good if you want to make two bumps to stage, will require trial and error.
P3 = Delayed Bump, once Bump is triggered Bump will not occur until a set delay time counts down, for example if you want a. 7 second delay before the bump you can set it up that way. Creep Mode = Infinite Bumps when trigger is held in, in between set bump times a delay time happens between each bump, for instance if your bump time is. 05 seconds and your delay is.
5 seconds then this will happen continuously until you release the bump button. P5 = Press Bump trigger and bump occurs when trigger is released.
The item "JH Racing Electronics Programmable Bump Box Stage Control Unit Transbrake Turbo" is in sale since Tuesday, October 22, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Other". The seller is "jhdiscounts" and is located in San Pablo, California. This item can be shipped to United States.